Price:Unfilled

Send inquiry

APG 0810H70

Chemical description

Aqueous solution of alkyl polyglucosides based on a fatty alcohol C8 - C10

 

Labeling information

INCI name: Capryl Glucoside

CAS-No.: 68515-73-1

Synonyms: Decyl Glucoside

 

Product properties

Appearance

light yellow liquid

Physical properties

Solid Content(%)                         68-72

Water (wt %)                                28-32

pH Value (20% aq.)                      11.5-12.5

Free Alcohol (wt %)                      1max

Viscosity (mPa·s), 25°C                3000-5000

Sulfated Ash (wt %)                      4max

Density(g/cm3),25°C                     1.15-1.17

 

Product guidance

APG 0810H70 are a nonionic surfactant that provides superior performance by combining the formulation ease and compatibility of typical nonionics with the solubility and foam characteristics of anionics. APG 0810H70 provide excellent hard surface detergency and processing benefits in a variety of cleaning products, such as kitchen & bath room cleaners as well as I&I alkaline cleaners. It exhibits superior wetting as well as excellent dispersing and surface tension reduction properties for increased soil removal and emulsification. Unlike typical nonionics, APG 0810H70 are highly soluble in concentrated electrolyte solutions and will hydrotrope other less soluble ingredients.

 

In addition to these unique performance characteristics, APG 0810H70 are made from renewable raw materials – glucose derived from corn, and fatty alcohols from coconut and palm kernel oils. Due to its chemistry,  APG 0810H70 are very mild, low in toxicity, and readily biodegradable.

 

Storage and transportation

APG 0810H70 can be stored in sealed original containers protected from frost and below 43 °C for at least 1 year.

 

Maximum Storage Temperature - recommended maximum storage temperature of APG 0810H70 is 43°C. When heating, avoid prolonged localized temperatures exceeding 43°C to avoid possible product discoloration. Use tempered water when possible. Low pressure steam is acceptable if the product is monitored regularly.

 

Bulk storage material – Carbon steel should not be used to store or handle APG 0810H70 due to probable contamination by iron. Recommended plastic drum or IBC made of high density polyethylene (HDPE) are both acceptable.

 

http://www.jeslyee.com/